Back to top
Send SMS Send Inquiry
Home » Products » Siemens Automation Products » SICAM PAS Software (6MD90)

SICAM PAS Software (6MD90)

SICAM PAS Software (6MD90)
SICAM PAS Software (6MD90)
Send Inquiry
Product Code : AUTO1
Brand Name : SIEMENS
Product Description

SICAM PAS Software (6MD90)

For some years now, power generation and distribution have been undergoing major changes. The innovation cycles (where operating equipment and communication media are concerned) are getting ever shorter, and the market is becoming increasingly deregulated. The systems used to monitor power supply equipment and processes must take account of these changes.

When new products are used, user friendliness, easy engineering, manifold interfacing to various communication media and extensibility are important Features.

SICAM PAS (Power Automation System) meets all the demands placed on a distributed substation control system both now and in the future. Amongst many other standardized communication protocols, SICAM PAS particularly supports the IEC 61850 standard for communication between substations and IEDs. SICAM PAS is an open system and in addition to standardized data Transfer processes it Features user interfaces for the integration of system-specific tasks and offers multiple automation options.

SICAM PAS can thus be easily included in existing systems and used for system integration, too. With modern diagnostics, it optimally supports commissioning and maintenance.

SICAM PAS is clearly structured and reliable, thanks to its open, fully documented and tested System.

Essential Features:

  • Modular and scalable hardware and software
  • User-friendly
  • Flexible, graphical configuration of automation
  • Open system thanks to standards

Device interfaces and communication protocols

  • In a substation that you configure and operate with SICAM PAS, you can use various types of protection units, IEDs, bay control units, measured-value recorders and telecontrol units from a wide range of manufacturers. SICAM PAS offers a large number of commercially available communication protocols for recording data from various devices and through differing communication channels. Subsequent expansion is easy.

Available protocols

These communication protocols and device drivers can be obtained as optional additions to the standard scope of SICAM PAS.

  • IEC 61850 (Client) IEC 61850 is the communication standard for interconnecting the devices at the bay and station control levels on the basis of Ethernet. IEC 61850 supports the direct exchange of data between IEDs, thus enabling switching interlocks across bays independently of the station control unit, for example.
  • IEC 60870-5-103 (Master) Protection units, IEDs, bay control units, measured-value recorders and transformer controllers from many manufacturers support the IEC 60870-5-103 protocol and can therefore be connected directly to SICAM PAS.
  • IEC 60870-5-101 (Master) The IEC 60870-5-101 protocol is generally used to connect telecontrol units. The balanced and unbalanced traffic modes are supported. Automatic dialing is also supported for the connection of substations with this protocol. SICAM PAS can establish the dial-up connection to the substation either cyclically or as required (e.g. for command output). By contrast, the substation can also establish a connection cyclically or in event-triggered mode.
  • IEC 60870-5-104 (Master) Furthermore, connection of substations is also supported by the TCP/IP-based IEC 60870-5-104 protocol.

RELISERV SOLUTION
X


RELISERV SOLUTION
Office No.-9, Plot 53/54, Sector-34, Space Heights, Near Tawa Hotel, Kamothe, Navi Mumbai - 410209, Maharashtra, India
Phone :+918068094352
Mr. Piyush Lalchand Rathi (Partner)
Mobile :+918068094352
Mr. Rajesh Sawale
Mobile :+918068094352