Back to top
Send SMS Send Inquiry

5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits

5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits
5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits
Send Inquiry
Product Code : UTK_2
Brand Name : Udey
Product Description
5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits

UDEY TESTER-US-56I is microprocessor controlled AC/DC Hipot with Insulation Resistance Tester. US-561 is designed to perform high voltage withstand and insulation resistance tests on various types of electrical products, systems and components.

Machine Feature

  • AC/DC withstand tests and Insulation resistance tests.
  • IR test mode: IR can be performed independently or in sequence with Dielectric Withstand test.
  • User selectable output voltage frequency of 50 Hz or 60 Hz.
  • Setup of trip current and output voltage without the high voltage activated.
  • Store and Recall test set-up memories.
  • All parameters are set up through simple menu driven program on screen.
  • Line load regulation from no load to full load.
  • Front Keys can be locked providing limited user access so that only authorized personnel with unlock code can modify test parameters.
  • Backlit LCD display allows monitoring of 100uA AC and 20uA DC: Useful when test requirements only allow a very low level of acceptable leakage current.
  • Advance A/D conversion, Uses Digital frequency synthesis technology to achieve perfect AC test power with crest factor of 1.35-1.45
  • Electronic settings: Test Voltage, High / Low limits of current, Ramp up time, Dwell time.
  • Backlit LCM display
  • Indicators: Flashing HV ON, PASS and FAIL indicators.
  • Audio alarm at FAIL.
  • Maximum output current is 12mA AC and 6mA DC.
  • Remote output for control to configure tester through simple PLC relay control.
  • Rugged table top cabinet

Machine Technical Specification

Supply Voltage

115/230 Volts ± 10%AC, 47-63 Hz single Phase.

AC WITH STAND TEST

Output Test Voltage

Nominal : 0-5kV/12mA AC

Output Frequency

50 Hz / 60 Hz

Output Waveform

Sine wave THD : <2% [Crest Factor > 1.3<1.5]

TRIP : Upper Limit

0.10 to 12.00mA; Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0.01 to 11mA]

DC WITH STAND TEST

Output Test Voltage

Nominal: 0-6kV/5mA DC

Output Ripple:mV p-p

<5% at 6kV/5mA Under Resistive Load

TRIP : Upper Limit

0.02 to 5.00mA; [0=OFF]. Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0.01 to 11mA)

TRIP : Lower Limit

0.00 to 5.00mA; [0=OFF]. Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0 to 4mA)

Voltage Setting AC/DC

AC : 0.00 to 5.00kV DC : 0.00 to 6.00kV
Resolution : 0.01kV per step; Accuracy: ±2% + 5 Volts.
Can be adjusted during test by UP/DOWN Keys

Voltage Regulation

± 1% + 5 volts [No load to full load].

Ramp Time [ Rise Time] DWELL TIME [Test time]

0.1 to 999.9 seconds, 0.1 second per step
0=0.1 second fixed setting
0.2 to 999.9 seconds, 0.1 second per step
0=Continuous running

METERING : 4 digits Voltmeter AC/DC

AC: 0.00 to 5.00kV; DC: 0.00-6.00kV
Resolution: 0.01kV; Accuracy:± 2% + 1 count.

Ammeter AC/DC Timer

AC: 0.10 to 12.00mA; DC: 0.02-5.00mA
Resolution: 0.01mA; Accuracy: ± 2% + 1 count.
Range: 0.0 to 999.9 seconds; Resolution: 0.1 second.
Accuracy: ± 0.1% reading + 0.05 seconds.

INSULATION RESISTANCE TEST Test Voltage : Settable

0.01 to 1.00kV DC; Resolution: 0.1kV per step
Accuracy: ± 2% + 2 volts.

Test Voltage : Display

0.00 to 1.00kV DC; Resolution: 0.01kV per step
Accuracy: ± 2% + 1 count.

Resistance : Display

1 to 1000 Meg ohm
Accuracy : ± 5% + 2 count at voltage = 500V DC.
± 7% + 2 count at voltage = 500V DC.

Test Time Resistance : Upper Limit
Resistance : Lower Limit

0.5 to 999.9 seconds, 0.1 s per step
0 = Continuous; Accuracy: ± 0.1% + 0.05 s.
0 and 1 to 1000 Meg ohm [0=OFF]
Resolution : 1 Meg ohm per step
Accuracy : ± 5% + 2 count at voltage = 500V DC.
: ± 7% + 2 count at voltage = 500V DC.
1 to 1000 Meg ohm; Resolution : 1Meg ohm per step
Accuracy : ± 5% + 2 count at voltage = 500 V DC.
: ± 7% + 2 count at voltage = 500 V DC.
GENERAL

Remote Control + Signal
Failure Alarms
Auto Discharge

9 pin D socket provides the following signals:
a) Remote Control : Test, Reset, Interlock
b) Outputs : Pass, Fail, Test in progress
Buzzer, LCD Display, Indicator
Maximum 200 ms
Maximum capacitive load verses output voltage
0.2 uF : Maximum 1kV
0.1 uF : Maximum 2kV
0.05 uF : Maximum 4kV
0.04 uF : Maximum 5kV
0.015 uF : Maximum 6kV

Program Memory

5 memories, 4 test modes selectable [W, I, W-I, I-W]

Keyboard Lock

Key Lock to avoid unauthorized access of use.

Display

LCD, dot matrix, back lit

Construction Power Cord

Sheet Steel Table Top Cabinet, Powder Coated with tilt-up front Feet.
Detachable 2 meter long powder cord terminated in 3 pin grounding plug.

Use Environment

Temperature : 0-40 deg C; R.H. = Maximum 80%
Altitude : Max 2000 Meters.

Dimensions

W x D x H : 28 x 39 x 9 cm approximately.
9 kg approximately

Standard Accessories

a) Mains cord 2 meter long -1 Number
b) HV and RETURN Test Leads -1 Set
c) D Connector with cable- 1 Number

RELISERV SOLUTION
X


RELISERV SOLUTION
Office No.-9, Plot 53/54, Sector-34, Space Heights, Near Tawa Hotel, Kamothe, Navi Mumbai - 410209, Maharashtra, India
Mr Piyush Lalchand Rathi (Partner)
Mobile :+919819614841, +919769207841
Mr. Dnyanesh Gawande (Partner)
Mobile :+919833686249